OMA Omaha Eppley Airfield, Concourse A.

[The Ruxin]

Fabulous work. Are the jetways 3D printed? They look great and very detailed

Yes sir - They were bought, then cut and customized with Evergreen Plastics by myself. The gates were a pain and I'll be still going over them with a bit of added detail to try and fit the OMA look.

 

[CM Aviation]

A little update:

I turned this into a bit of a section model of the center part of terminal between concourse A and B (south and north). Thank you all again!

Units!

 

[The Ruxin]

Here's a little update:

I had some time to do some airbrushing the last few days on some small details roofing vents, k-rails and such. I still have floodlights and some more detail to add so more to come! Thanks again everyone!

 

[LeoMuse747]

Here's a little update:

I had some time to do some airbrushing the last few days on some small details roofing vents, k-rails and such. I still have floodlights and some more detail to add so more to come! Thanks again everyone!

Stunning, as always! Do you plan to add lightpoles, or these are actually floodlights installed at the roof of the terminal?

 

[The Ruxin]

Stunning, as always! Do you plan to add lightpoles, or these are actually floodlights installed at the roof of the terminal?

This concourse actually has both. I usually do my own lighting, however, I ordered pole flood lights that I'm going to cut and airbrush. When I get around ill try to add the wall flood lights(which are extremely small). The ordered parts on the terminal include the jetways and light poles(which are cut and customized by myself).

 

[IndyJets]

Evergreen Plastics. Thank you!

Old school scratchbuilding! Most of us are 3D printing everything now...

Looks great! @Purpleplane and I may be able to help you out with your flight data and aircraft in/out placements once you get it finished.

 

[The Ruxin]

Hello all! OMA Concourse A is is finally complete(or sorta - I guess I'm never really done with the detail). I did end up touching up all the gates to provide more detail including about four perpendicular slider gates on 1,8,9 & 10. The slider gates look very old, maybe about from the 1980's or 90's (someone can let me know if you have any other information on that). I also completed some electric boxes and roofing detail on vents, outlets, etc. There are also the four leased gates by Delta Airlines which have the Delta logo signage that I added on gates 2,3,4 & 5.
The images include the last available satellite shots via Google Earth of Concourse A before the construction began joining concourses A and B to one main terminal. There's also a gate number map from the old Concourse A to see the numbers I listed above.
I'll still be working on some GSE to match the airport as well as a few touch-ups. Enjoy and thank you all again for the replies!

 

[LeoMuse747]

Hello all! OMA Concourse A is is finally complete(or sorta - I guess I'm never really done with the detail). I did end up touching up all the gates to provide more detail including about four perpendicular slider gates on 1,8,9 & 10. The slider gates look very old, maybe about from the 1980's or 90's (someone can let me know if you have any other information on that). I also completed some electric boxes and roofing detail on vents, outlets, etc. There are also the four leased gates by Delta Airlines which have the Delta logo signage that I added on gates 2,3,4 & 5.
The images include the last available satellite shots via Google Earth of Concourse A before the construction began joining concourses A and B to one main terminal. There's also a gate number map from the old Concourse A to see the numbers I listed above.
I'll still be working on some GSE to match the airport as well as a few touch-ups. Enjoy and thank you all again for the replies!

Absolutely wonderful work. Nice to see even some wear/dirt on the jetways! Attention to detail is