bakejobb_23
Well-known member
Beginning to layout an extension to my fictional layout. This extension will add 3 standard gates and 5 hardstands for regionals. The middle standard gate will reach up to a 767-300 and the rest are all up to a 757 or A321/737 size. This brings the terminal up to a total of 5 regional gates (up to about a CRJ200/E145), 3 gates up to an A321/737, 3 more gates up to a 757, and one gate for up to a 767. Plus 3 additional Southwest stylized gates. Total of gates A1-A11 as i’m calling it, with A11 having an A11a-A11e for the regional gates.
This extension will nearly complete the airside of this terminal (Terminal A as I am officially calling it!) as all that will be left is one or two additional “southwest stylized” gates on the left hand side (A1/A2 as i’m calling them eventually).
Those two last gates will be on the next extension which will be two more similar sized boards below of this picture featuring mostly a very detailed land side of the terminal. I’m choosing to do this so I have flexibility over only setting up one board, all four, or any combination. The terminal will cover up most of the seams as only 3/4” of the building sits on these boards as you can also see in the photo.

The small white building in the middle will be a bump out on an eventual terminal building to add more interest to it. It has yet to be fully designed but I hope to grab inspiration from a handful of 2000s/2010s terminals around the US.

A photo “Down the alley” showing what they can look like when eventually finished:

I have no clue when i’ll get around to this (probably after PHL is finished) but I don’t think I’ll stray too far from this layout. I have a Terminal B sketched out eventually too but that’s wayyyyy later down the line for me
This extension will nearly complete the airside of this terminal (Terminal A as I am officially calling it!) as all that will be left is one or two additional “southwest stylized” gates on the left hand side (A1/A2 as i’m calling them eventually).
Those two last gates will be on the next extension which will be two more similar sized boards below of this picture featuring mostly a very detailed land side of the terminal. I’m choosing to do this so I have flexibility over only setting up one board, all four, or any combination. The terminal will cover up most of the seams as only 3/4” of the building sits on these boards as you can also see in the photo.

The small white building in the middle will be a bump out on an eventual terminal building to add more interest to it. It has yet to be fully designed but I hope to grab inspiration from a handful of 2000s/2010s terminals around the US.

A photo “Down the alley” showing what they can look like when eventually finished:

I have no clue when i’ll get around to this (probably after PHL is finished) but I don’t think I’ll stray too far from this layout. I have a Terminal B sketched out eventually too but that’s wayyyyy later down the line for me
