My biggest project yet

[OllieBHaas25]

I got a little work done on the markings including my first attempt at weathering. One of my pens burst as I was drawing (red circle) but I was able to dab up the excess and somewhat recover.

 

[Ryan_426]

I got a little work done on the markings including my first attempt at weathering. One of my pens burst as I was drawing (red circle) but I was able to dab up the excess and somewhat recover.

Nice job, couldn’t even tell what was wrong without the red circle

 

[OllieBHaas25]

Nice job, couldn’t even tell what was wrong without the red circle

Thanks! I think it’s the lighting bc it’s driving me crazy.

 

[Ryan_426]

Thanks! I think it’s the lighting bc it’s driving me crazy.

It’s just because you’re only paying attention to that spot. If you look at the airport as a whole you’ll realize you can barely see it

 

[OllieBHaas25]

I purchased a 737 from squatchys on Labor Day weekend but I still haven’t heard anything from him. Is this normal?

 

[OllieBHaas25]

Got a bit of work done over the weekend with gse road markings. Much to improve for next time but it works for now.

 

[LeoMuse747]

Got a bit of work done over the weekend with gse road markings. Much to improve for next time but it works for now.

This is looking great! Ground markings can bring such a nice realism to any layout.
Please don't forget to add details to your terminal building aswell

 

[OllieBHaas25]

This is looking great! Ground markings can bring such a nice realism to any layout.
Please don't forget to add details to your terminal building aswell

Yeah fs. It was frustrating so I took a break for the ground markings but I’ll prob go back to the terminal in a few days. Still waiting on the 737 to continue the nb gates

 

[OllieBHaas25]

Last day of ground markings before I switch back to the terminal. A few mistakes here and there but nothing a I can’t go back and do.

 

[Ryan_426]

Last day of ground markings before I switch back to the terminal. A few mistakes here and there but nothing a I can’t go back and do.

Looking good!

 

[OllieBHaas25]

The SAS 737-600 arrived today, and it means I’ll be able to expand the narrowbody gates today.

 

[LeoMuse747]

Be careful with that gate spacing. Is the SAS 737 able to pushback without colliding with the 777 behind?

 

[OllieBHaas25]

I just had it there for scale, that gate will only be atrs and such prop aircraft. I also made sure there was enough space for them to back up so it should be fine.

 

[OllieBHaas25]

It’s been a while since i’ve posted on this thread and a lot has changed. For starters, i decided the terminal was too complicated to design and so i flipped over the board and started over. I was unusually focused the past few days and got the whole apron done. For some reason the taxiways turned out blue so i’ll be making a trip to hobby lobby for some paint and balsa wood for the terminal ( i'm unsure if it’ll be temporary or permanent, that depends on if i’m able to design a better one on cad that i can 3d print) so more progress pics will come soon.

 

[Ryan_426]

Looks good! I thought you had already constructed the previous terminal though?

 

[OllieBHaas25]

I had built it out of balsa wood as a temporary terminal and was designing a printable one but i just couldn’t get the dimensions correct. I was also a little unhappy with the layout of the gates.

 

[LeoMuse747]

It’s been a while since i’ve posted on this thread and a lot has changed. For starters, i decided the terminal was too complicated to design and so i flipped over the board and started over. I was unusually focused the past few days and got the whole apron done. For some reason the taxiways turned out blue so i’ll be making a trip to hobby lobby for some paint and balsa wood for the terminal ( i'm unsure if it’ll be temporary or permanent, that depends on if i’m able to design a better one on cad that i can 3d print) so more progress pics will come soon.

You're doing a fantastic job! The apron lines look really great!

 

[OllieBHaas25]

You're doing a fantastic job! The apron lines look really great!

thank you so much!

 

[BubblesAviation]

It’s been a while since i’ve posted on this thread and a lot has changed. For starters, i decided the terminal was too complicated to design and so i flipped over the board and started over. I was unusually focused the past few days and got the whole apron done. For some reason the taxiways turned out blue so i’ll be making a trip to hobby lobby for some paint and balsa wood for the terminal ( i'm unsure if it’ll be temporary or permanent, that depends on if i’m able to design a better one on cad that i can 3d print) so more progress pics will come soon.

Is this 1:200? I could get you a file for a terminal I’m designing that would work, I would need to change a few things if you want it to be jetways and not doors for walking or airstairs though.

 

[OllieBHaas25]

That’d be great! Do you need dimensions?

Is this 1:200? I could get you a file for a terminal I’m designing that would work, I would need to change a few things if you want it to be jetways and not doors for walking or airstairs though.