Anyone know how to fix my a380 model being tail heavy/keep the nose landing gear from lifting up?

[DiamondCollector]

It doesn’t matter what surface it’s on the nose gear doesn’t want to stick on the ground make the aircraft appear tail heavy

 

[abdulmohiuddin]

It's a mould issue with the Phoenix models, there isn't really any fix apart from 3d printing a small piece that can keep it stable

 

[redriveraviation]

I have one with a similar issue, certainly unfortunate, but at least the rest of the mold is nice!

 

[josecolme]

Perhaps get a tug and attach it to the nose gear. It'll be counterweight and look nice.

 

[OscarBravo992]

Unfortunately this is just one of those things that can't be helped. Phoenix's A380 mould is excellent, however, all of the models are hollow, and because of this they tend to be back-heavy. Other than 3D printing a tail stand or perhaps connecting a tug to the nose gear, there is not much you can do.

 

[pommy80]

Phoenix? I fixed mine by pulling the centre gear (the 2 in the middle) and using superglue with it fully extended.