3D Design Deck October 2025 Release

[Columbus Aviation]

Q400’s just finished an hour go. 3 more days on the 1900D.

After that we are taking 3 days to do the 1:400 CL-415.

November release will be done announced around November 16th and that batch of models will finish around December 7th.

The next 2 releases are nuts with a plethora of new designs.

(Martin’s mars, maybe f18, global, and either an e145 or CRJ 7/9)

I can't wait! I've got the United & PAL 1900Ds and the WestJet Q400 on preorder with YV400!

I'm literally going to break the bank, but I also can't wait to see the global, the larger CRJs, OR the 145. so excited!

 

[Starz10p Aviation]

Q400’s just finished an hour go. 3 more days on the 1900D.

After that we are taking 3 days to do the 1:400 CL-415.

November release will be done announced around November 16th and that batch of models will finish around December 7th.

The next 2 releases are nuts with a plethora of new designs.

(Martin’s mars, maybe f18, global, and either an e145 or CRJ 7/9)

Can’t wait to see the larger CRJs and E145XR. Would super popular liveries like United Express get more consistent rereleases over time?

 

[3D Design Deck]

Can’t wait to see the larger CRJs and E145XR. Would super popular liveries like United Express get more consistent rereleases over time?

I’m planning to make the e145 just to run the united xr. So if the xr does good I’ll do the other livery. If they both do decent I’ll release it again maybe in a year. I also might release 2 tail numbers for each livery.

For a regular e145 I was going to do in originally. But I realized the standard 145 doesn’t have that little fin at the back of the fuselage. Therefor it’s a completely new design. And I don’t see enough releases to make a standard e145.

For the crj’s I won’t do the united 550 because it’s been done. The rest I’ll get to hopefully soon. If they do well I’ll rerelease those too.

 

[Columbus Aviation]

I’m planning to make the e145 just to run the united xr. So if the xr does good I’ll do the other livery. If they both do decent I’ll release it again maybe in a year. I also might release 2 tail numbers for each livery.

For a regular e145 I was going to do in originally. But I realized the standard 145 doesn’t have that little fin at the back of the fuselage. Therefor it’s a completely new design. And I don’t see enough releases to make a standard e145.

For the crj’s I won’t do the united 550 because it’s been done. The rest I’ll get to hopefully soon. If they do well I’ll rerelease those too.

I know this isn't the suggestion thread, but if you ever do the standard 145, I would love to see Aero on it! Mega excited for 145s!!

 

[Starz10p Aviation]

I’m planning to make the e145 just to run the united xr. So if the xr does good I’ll do the other livery. If they both do decent I’ll release it again maybe in a year. I also might release 2 tail numbers for each livery.

For a regular e145 I was going to do in originally. But I realized the standard 145 doesn’t have that little fin at the back of the fuselage. Therefor it’s a completely new design. And I don’t see enough releases to make a standard e145.

For the crj’s I won’t do the united 550 because it’s been done. The rest I’ll get to hopefully soon. If they do well I’ll rerelease those too.

Sounds great. For the United 550/700, the Unicon livery can still be done, and I can assume that prices on the GJ 550 will skyrocket, so making one of those when that inevitably happens would be a smart decision

 

[3D Design Deck]

Sounds great. For the United 550/700, the Unicon livery can still be done, and I can assume that prices on the GJ 550 will skyrocket, so making one of those when that inevitably happens would be a smart decision

Tulip, battleship and unicon I’ll def do.

 

[The_SingingAvgeek]

Q400’s just finished an hour go. 3 more days on the 1900D.

After that we are taking 3 days to do the 1:400 CL-415.

November release will be done announced around November 16th and that batch of models will finish around December 7th.

The next 2 releases are nuts with a plethora of new designs.

(Martin’s mars, maybe f18, global, and either an e145 or CRJ 7/9)

I think I just heard my bank account scream in pain

 

[JET-10/11/47]

On the 200 scale front these look good. Although most of my concentration is on 400 scale,I’d be tempted by one or two of these. Whilst on the subject, would you guys ever consider doing King Air’s?

 

[3D Design Deck]

On the 200 scale front these look good. Although most of my concentration is on 400 scale,I’d be tempted by one or two of these. Whilst on the subject, would you guys ever consider doing King Air’s?

Yes I have to run them next year for an airline in 1:200. 1:400 idk though, the 1900D is bigger and it’s already just so hard to assemble and it’s so delicate I don’t think a king air would work.

 

[Columbus Aviation]

Yes I have to run them next year for an airline in 1:200. 1:400 idk though, the 1900D is bigger and it’s already just so hard to assemble and it’s so delicate I don’t think a king air would work.

Would the same apply to a potential PC-12?

 

[JET-10/11/47]

Yes I have to run them next year for an airline in 1:200. 1:400 idk though, the 1900D is bigger and it’s already just so hard to assemble and it’s so delicate I don’t think a king air would work.

Sorry my fault I should’ve mentioned I was looking for it in 200 scale. My mistake!

 

[3D Design Deck]

Would the same apply to a potential PC-12?

I don’t know because the pc-12 has the engine on the nose which makes it a heck of a lot easier to produce. I’ll have to see I don’t know at the moment.

 

[FoxtrotAviation]

Since your releasing a lot of new designs I’m assuming your taking a break from beech 1900s but do you think you will release a Pacific coastal 1900 anytime soon?
Thanks!